NDB Pro RGB Pixel Lighting Controller

NDB Pro Information

Minleon NDB Pro Pixel Light Controller is an industry standard ART-Net, E1.31 & DDP enabled multi output controller that ihas multiple connection options and can also be standalone with its internal effects which are setup via a WiFi access point or can be controlled by the Mineon Network Effects Controller (NEC) or a computer using ART-Net, E1.31 or DDP enabled software or using an Art-Net or E1.31 enabled console. Each NDB pro can output 800 lights. The NDB Pro allows for large scaled shows to be created using industry standard ART-Net, E1.31 and DDP communication protocols or using its built in effects

  • 8 fused outputs
  • use up to 5 colours in various effects for colour theming via WiFi and RJ45 connection
  • Multi chipset support - UCS 8903, SK6812, WS2813, WS2812, WS2811, WS2811 V2, GS8206, GS8208, UCS2903,TM1804, SM16703, APA104
  • Control via Wifi or the Minleon NEC or Art-Net, E1.31 or DDP protocols
  • 32 amps maximum output current 
  • Multi-voltage input, 12VDC to 24VDC
  • Quick ½ turn connect plugs reducing installation and removal time
  • Web interface accessed via WiFi to configure the controller’s channels and settings, effects and colours
  • RJ45 network interface and WiFi access 
  • Control RGB or RGBW lights and variations
  • Total of 10 universes of Art-Net, E1.31 or DDP data
  • Create effects play lists
  • Reverse data on an output, beginning of a string becomes the end
  • Supports up to 20 x Minleon Smart-Ts per Output
  • Hard Reset button
  • Firmware can be upgraded
  • Can be auto configured using the Minleon NEC
  • Meanwell 320 Watt HLG power supply can screw on to the back of the controller

Download NDB Pro User Manual


NDB Pro Specifications



Part Number


Number of Lights

800 RGB Lights - Total 10 universes of data

Number of Outputs

8 Fused Outputs (5 amp fuse per output)

Input Voltage/Current

12 to 24 Volts DC (max 32 amps) can fit standard Meanwell HLG 320 watt power supply to controller

IC light chip Support

Minleon RGB+ Lights, UCS 8903, UCS 2903, SK6812, WS2813, WS2812, WS2811, WS2811 V2, GS8206, GS8208, TM1804, SM16703, APA104

LED support

R-G-B – R-G-B-W

Network Interface

WiFi and RJ45 supports Art-Net, E1.31 (unicast) and DDP inputs

Web Interface

Yes – For configuring controller channels, parameters and settings including effects, colours and effects playlist

Plug Type

Minleon ½ Turn Quick Connect Plug


250mm L x 150mm W x 60mm H

Working Temp

-20  to  +60 Deg C

Waterproof Level

IP33, can be outdoor use if output cables hanging downward


24 Months



NDB Pro 3
NDB Pro 2
NDB Pro 1
With Added 320 watt Power supply that fits to the back of the controller

Sorry, there are no products in this collection.